WAX510D

802.11ax (WiFi 6) Dual-Radio Unified Access Point

WiFi 6, Wait No More

The Smartest Choice of 11ax Access Point

True WiFi 6

The WAX510D is truly the next generation of wireless (WiFi 6) AP, especially for businesses looking to strike the right balance between performance and budget. Its built-in 2nd Generation WiFi 6 (Qualcomm 802.11ax 2.0) chipset allows the access point to take advantage of the full range of WiFi 6 technologies including uplink OFDMA and MU-MIMO, which can’t be found in the earlier releases of 802.11ax products. The WAX510D boasts an impressive quad-core processor with 2 network accumulators to guarantee that a smooth and consistently fast service is provided to each client at all times.

An access point that fits your need

We understand that mounting an access point to the ceiling isn’t always possible due to the challenging environments like warehouses, historical buildings or stylish hotels were the aesthetics of the building are a priority. The WAX510D is equipped with a dual-optimized antenna that is selectable, allowing the access point to be mounted on the wall or on the ceiling without compromising on performance and coverage.

The smartest choice

The WAX510D is not only efficient at delivering impressive high speeds with smooth and consistent delivery to wireless clients, but also it’s efficient on power. The WAX510D can deliver its impressive performance while keeping the consumption of PoE within the PoE+ standard, so that you can enjoy the latest WiFi 6 technology offering without the need to invest in upgrading your traditional switching architecture.

Manage it your way!

The NWA50AX with NebulaFlex offers the flexible manageability for you to freely choose between the device’s local web interface or onboarding to our super easy Nebula cloud management interface that you never need to worry about forgetting the IP address or lost account and password whatsoever.

 

Watch Demo
Find Out More

 

Anytime, Anywhere with Nebula Mobile App

  •  Easy device onboarding with QR code scan & installation wizard
  •  Network and device status at a glance
  •  WiFi sharing via QR code or mobile messaging apps
  •  Network client access control
  •  Live troubleshooting tools
  •  Push notifications for abnormal network events

Just Connect with Nebula

How to Configure

Suggested PoE Injector

PoE12-30W

RJ-45 (Data) Input 1
RJ-45 (Data + Power) Output 1
Data Rate 100 Mbps and 1/2.5 Gbps
PoE Standard PoE, PoE+
Total PoE budget 30 watts

 

 

Learn More Here

Specification

WAX510D
Description
Product name 802.11ax (WiFi 6) Dual-Radio Unified Access Point
Wireless
Standard IEEE802.11 ax/ac/n/g/b/a
MIMO MU-MIMO
Wireless speed 2.4GHz: 575 Mbps
5GHz: 1200 Mbps
Frequency band 2.4 GHz:
USA (FCC): 2.412 to 2.462 GHz
Europe (ETSI): 2.412 to 2.472 GHz

5 GHz:
USA (FCC): 5.15 to 5.35 GHz; 5.725 to 5.850 GHz
European (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz
Bandwidth 20-, 40-, 80-MHz
Conducted typical transmit output power*1 US (2.4GHz/5GHz):
23/26 dBm

EU (2.4GHz/5GHz):
20/25 dBm
RF Design
Antenna Type 2x2 dual-optimized antenna
Antenna gain 2.4GHz: Peak Gain 5dBi
5GHz: Peak Gain 6dBi
Minimum receive sensitivity Min. Rx sensitivity up to -101 dBm
WLAN Feature
Band steering Yes
WDS (Standalone)*2 Yes (V6.10)
ZyMesh (AP Controller)*2 Yes (V6.10)
Smart mesh*2 Yes (V6.10)
Fast roaming Pre-authentication, PMK caching, and 802.11r/k/v
DCS (Auto Channel) Yes
Load balancing Yes
Security
Wireless Security WPA
WPA-PSK
WPA-Enterprise (WPA/WPA2/WPA3)
Access management L2-isolation
MAC filtering
Rogue AP detection
EAP
IEEE 802.1X
RADIUS authentication
Networking
IPv6 Yes
VLANs Yes
WMM Yes
U-APSD Yes
DiffServ marking Yes
Management
Operating mode Nebula cloud managed
Controller-managed
Standalone
ZON Utility Discovery of Zyxel switches, APs and gateways
Centralized and batch configurations:
IP configuration
IP renew
Device reboot
Device locating
Web GUI access
Firmware upgrade
Password configuration
Zyxel AP Configurator Batch AP configuration
Batch AP firmware upgrade
Batch AP profile backup
Zyxel Wireless Optimizer WiFi AP planning
WiFi coverage detection
Wireless health management
Web UI/CLI Yes
SNMP Yes
Physical Specifications
Item Dimensions (WxDxH)(mm/in.)
180 x 180 x 39 / 7.09 x 7.09 x 1.54

Weight (g/lb.)
453g/1
Packing Dimensions (WxDxH)(mm/in.)
229 x 216 x 64 / 9.02 x 8.5 x 2.52

Weight (g/lb.)
770g/1.7
Included accessories Mount plate
Mouting screws
MTBF (hr) 635,837
Physical Interfaces
Ethernet port 1 x 10/100/1000/2500M LAN
1 x 10/100/1000M LAN
Power
PoE (802.3)at power draw 17 W
DC input 12 VDC 1.5A
Environmental Specifications
Operating Temperature
0°C to 50°C/32°F to 122°F

Humidity
10% to 95% (non-condensing)
Storage Temperature
-30°C to 70°C/-22°F to 158°F

Humidity
10% to 90% (non-condensing)
Certifcations
Radio FCC Part 15C
FCC Part 15E
ETSI EN 300 328
EN 301 893
LP0002
EMC FCC Part 15B
EN 301 489-1
EN 301 489-17
EN55022
EN55024
EN61000-3-2/-3
EN60601-1-2
BSMI CNS13438
Safety Safety EN 60950-1
IEC 60950-1
BSMI CNS14336-1

All specifications are subject to change without notice.

  • Conducted typical transmit output power excludes antenna gain. For total (EIRP) transmit power, add antenna gain.
  • WDS, ZyMesh, Smart Mesh and Industry’s Open Mesh, Easy Mesh are different mesh systems that do not work with one another.

Have Any Questions?

Or simply wish to find out how Go Nimbus can help your business? Just click the button below.